Glann kab metal segondè-tanperasyon ak nwayo milti (fil metrik / PG)
Glann kab metal segondè-tanperasyon ak nwayo milti (fil metrik / PG)
Entwodiksyon
Glann kab yo itilize sitou pou kranpon, ranje, pwoteje câbles yo kont dlo ak pousyè.Yo lajman aplike nan domèn tankou tablo kontwòl, aparèy, limyè, ekipman mekanik, tren, motè, pwojè elatriye.Nou ka bay ou ak glann kab metal segondè-tanperasyon ak nwayo milti ki fèt an kwiv nikèl-plake (Tèb lòd: HSM.DS-M/nxd), Nerjaveèi asye (No Lòd: HSMS.DS-M/nxd) ak aliminyòm (Tèb lòd: HSMAL.DS-M/nxd).
| Materyèl: | Kò: kwiv nikèl-plake;sele: kawotchou Silisyòm |
| Ranje Tanperati: | Min -50℃,Maksimòm 200℃ |
| Degre pwoteksyon: | IP68 (IEC60529) ak apwopriye O-bag nan seri fikse espesifye |
| Pwopriyete: | V0 (UL94), san alojene, fosfò ak Kadmyòm, |
| Sètifikasyon: | CE, RoHS, UV-rezistans, aje-rezistans. |
Spesifikasyon
(Tanpri kontakte nou pou plis enfòmasyon si ou bezwen lòt gwosè oswa fil ki pa enkli nan lis sa a.)
| Atik non. | Fil | Ranje fixation | GL | Gwosè kle | Pakèt |
|
| Dimansyon | mm | mm | mm | inite yo |
| * HSM.DS-M20/5×2.5 | M20 × 1.5 | 5×2.5 | 7 | 22 | 32 |
| HSM.DS-M25/3×5 | M25 × 1.5 | 3×5 | 7 | 28 | 18 |
| * HSM.DS-M25/3×6.5 | M25 × 1.5 | 3×6.5 | 7 | 30/28 | 18 |
| HSM.DS-M25/4×3.5 | M25 × 1.5 | 4 × 3.5 | 7 | 28 | 18 |
| * HSM.DS-M25/4×5 | M25 × 1.5 | 4×5 | 7 | 28 | 18 |
| HSM.DS-M25/2×8.5 | M25 × 1.5 | 2×8.5 | 7 | 30 | 18 |
| * HSM.DS-M25/3×7.5 | M25 × 1.5 | 3×7.5 | 7 | 30 | 8 |
| HSM.DS-M32/3×8.5 | M32 × 1.5 | 3×8.5 | 8 | 36 | 8 |
| * HSM.DS-M32/5×5.5 | M32 × 1.5 | 5 × 5.5 | 8 | 36 | 8 |
| * HSM.DS-M40/5×8.5 | M40 × 1.5 | 5×8.5 | 9 | 45 | 8 |
| * HSM.DS-M40/3×12.5 | M40 × 1.5 | 3×12.5 | 9 | 45 | 8 |
| HSM.DS-M50/4×12.5 | M50 × 1.5 | 4×12.5 | 9 | 50/55 | 8 |
| HSM.DS-M50/5×12.5 | M50 × 1.5 | 5×12.5 | 9 | 60 | 2 |
| HSM.DS-M50/13×7 | M50 × 1.5 | 13×7 | 9 | 55 | 2 |
| * HSM.DS-P21/3×6.5 | PG21 | 3×6.5 | 7 | 30 | 18 |
| *HSM.DS-P21/6×6 | PG21 | 6×6 | 7 | 30 | 18 |
| HSM.DS-P29/3×8.5 | PG29 | 3×8.5 | 8 | 40/36 | 8 |
| * HSM.DS-P36/5×8.5 | PG30 | 5×8.5 | 8 | 50/45 | 4 |
| * HSM.DS-P36/3×12.5 | PG31 | 3×12.5 | 8 | 50/45 | 4 |
